Contact us for a quote today.
Email sales@rega-uk.com or call our office on 01767 600499 for more info.
Air Control Dampers
Complete galvanised steel, aluminium or stainless steel construction.
Aerofoil section blades for low air flow resistance in fully open position.
100mm or 165mm blade widths.
Nylon bearings ensure maintenance free long life.
Opposed blade operation for progressive air control.
Additional option for seals to provide leakage less than 10 l/s/m2 at 100Pa.
Available with insulated blades for low thermal conductivity.
Powder coated finish available.
Smoke Control Dampers
Aerodynamic double skin blade for minimum flow resistance.
Designed to withstand 300°C for 2 Hours.
High temperature silicone blade edge seals and stainless steel side seals for low leakage.
Linkage system operation with brass bearings.
Galvanised steel 1.2mm high strength casing 185mm deep.
Opposed blade operation for progressive air control.
Conforms to EN12011-3 – specification for powered smoke and heat exhaust ventilators.
Back Draught Dampers
Galvanised steel 1.2mm high strength casing 160mm deep.
Low weight 0.7mm galvanised steel blades for minimum lift off pressure.
Low air flow resistance in fully open position.
Full length 12mm stainless steel shafts minimise blade deflection under high differential pressures.
Nylon bearings for long service life.
Available in stainless steel.
Heavy duty option available.
Additional option for pressure relief damper suitable for operation at 4000Pa.
Circular Dampers
Operation options include manual, electric or pneumatic or constant volume.
Temperature range -30°C to +100°C.
Available in galvanised steel or stainless-steel construction.
Sizes ranging from 100mm to 630mm diameter.
Available in air tight up to 1000 Pa.
Duct manufactured by us, in the UK
Rega Duct
Aluminium or Type 316 Stainless Steel.
All metal corrugated construction.
Easily formed by hand to bends and offsets.
Maintains cross section area after bending to ensure low air flow resistance.
Stayput characteristics ensure minimal support required.
Available factory insulated
Rega Duct Acoustic
Aluminium.
All metal corrugated construction.
Easily formed by hand to bends and offsets.
Maintains cross section area after bending to ensure low air flow resistance.
Stayput characteristics ensure minimal support required.